When we handle deck cleaning for pressure-treated wood in Kenner, LA, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On pressure-treated wood, the method we use is low-pressure wash.
Method and pressure
Cleaning solution: An oxygen-based or sodium percarbonate wood cleaner, then an oxalic acid brightener.
Cleaning pressure-treated wood safely
Pressure-treated pine is the most common deck and fence wood. It grays, mildews and gets slippery when wet. A wood cleaner does most of the work, and a brightener afterward restores the wood's color and helps new stain soak in.
Avoid: High pressure and narrow tips, which leave furry, gouged boards and lap marks.
How often: Clean yearly; restain every 2-3 years.
When to book deck cleaning for pressure-treated wood
- Gray, weathered boards
- Green or black growth and slippery spots
- Stain that is peeling or worn through
- Dark spots under planters and furniture
- Mildew between composite boards
What causes the dirt and stains
- Sun breaking down the wood surface (it turns gray)
- Shade, leaves and moisture feeding mildew
- Old stain or sealer wearing unevenly
- Pollen and dirt trapped in the gaps
Safe steps for homeowners
- Clear the gaps between boards with a putty knife so water drains
- Sweep often and keep leaves off the deck
- Move planters and rugs now and then
- Check for loose boards, nails and soft spots before anyone washes it
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Furry, gouged wood and lap marks from too much pressure
- Water and grime blasted onto the house siding
- Using chlorine bleach on wood, which can damage fibers and fasteners
- Washing composite decking in a way that voids its warranty
What happens on the day
- Inspect the boards, rails and finish
- Protect nearby siding and plants
- Apply a wood or composite cleaner and let it dwell
- Rinse at low pressure, following the grain
- Apply brightener on wood and let it dry before any stain
Deck Cleaning for Pressure-Treated Wood cost in Kenner, LA
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for pressure-treated wood
- Pressure Washing for Pressure-Treated Wood
- Deck Restoration & Staining for Pressure-Treated Wood
- Fence Cleaning for Pressure-Treated Wood
- Exterior Mold & Mildew Removal for Pressure-Treated Wood
Deck Cleaning for Pressure-Treated Wood in Kenner, LA
Wood decks and fences in Louisiana mildew fast and can rot where water and leaves sit. Cleaning every year and refinishing every two to three keeps the wood sound.
Spring pollen season in Louisiana coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.
We provide deck cleaning for pressure-treated wood across Kenner (ZIP codes 70062, 70063, 70064, 70065 and 70097) and nearby towns including River Ridge (2.8 mi), Elmwood (4 mi), Harahan (4.4 mi) and Metairie (5.4 mi). Call (555) 010-0000 for a free quote in Kenner.
Deck Cleaning for Pressure-Treated Wood: frequently asked questions
How much does deck cleaning for pressure-treated wood cost in Kenner, LA?
Deck Cleaning for Pressure-Treated Wood typically costs $250-$600 for a typical 200-400 sq ft deck, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for deck cleaning for pressure-treated wood?
For pressure-treated wood: usually 500-1,200 PSI with a wide fan tip. What we avoid: high pressure and narrow tips, which leave furry, gouged boards and lap marks. The cleaning solution does most of the work, followed by a gentle rinse.
Is deck cleaning for pressure-treated wood safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule deck cleaning for pressure-treated wood?
Clean yearly; restain every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.